Re: Tight valves


[ Follow Ups ] [ Post Followup ] [ TubeNet BBS ] [ FAQ ]

Posted by Lew on July 07, 2001 at 13:59:14:

In Reply to: Tight valves posted by Dave Baird on July 07, 2001 at 13:22:40:

Have you cleaned it thoroughly? If not, remove the valves then give it a bath in warm (not hot) soapy water. Use a nylon bottle brush on the valve casings. Rinse completely with clean water. Clean the valve pistons separately. Then reassemble and oil.


Follow Ups: